---
title: Testing
---

## Overview

All examples in this guide will be written using [Pest](https://pestphp.com). To use Pest's Livewire plugin for testing, you can follow the installation instructions in the Pest documentation on plugins: [Livewire plugin for Pest](https://pestphp.com/docs/plugins#livewire). However, you can easily adapt this to PHPUnit.

Since all actions are mounted to a Livewire component, we're just using Livewire testing helpers everywhere. If you've never tested Livewire components before, please read [this guide](https://livewire.laravel.com/docs/testing) from the Livewire docs.

## Getting started

You can call an action by passing its name or class to `callAction()`:

```php
use function Pest\Livewire\livewire;

it('can send invoices', function () {
    $invoice = Invoice::factory()->create();

    livewire(EditInvoice::class, [
        'invoice' => $invoice,
    ])
        ->callAction('send');

    expect($invoice->refresh())
        ->isSent()->toBeTrue();
});
```

To pass an array of data into an action, use the `data` parameter:

```php
use function Pest\Livewire\livewire;

it('can send invoices', function () {
    $invoice = Invoice::factory()->create();

    livewire(EditInvoice::class, [
        'invoice' => $invoice,
    ])
        ->callAction('send', data: [
            'email' => $email = fake()->email(),
        ])
        ->assertHasNoActionErrors();

    expect($invoice->refresh())
        ->isSent()->toBeTrue()
        ->recipient_email->toBe($email);
});
```

If you ever need to only set an action's data without immediately calling it, you can use `setActionData()`:

```php
use function Pest\Livewire\livewire;

it('can send invoices', function () {
    $invoice = Invoice::factory()->create();

    livewire(EditInvoice::class, [
        'invoice' => $invoice,
    ])
        ->mountAction('send')
        ->setActionData([
            'email' => $email = fake()->email(),
        ])
});
```

## Execution

To check if an action has been halted, you can use `assertActionHalted()`:

```php
use function Pest\Livewire\livewire;

it('stops sending if invoice has no email address', function () {
    $invoice = Invoice::factory(['email' => null])->create();

    livewire(EditInvoice::class, [
        'invoice' => $invoice,
    ])
        ->callAction('send')
        ->assertActionHalted('send');
});
```

## Modal content

To assert the content of a modal, you should first mount the action (rather than call it which closes the modal). You can then use [Livewire assertions](https://livewire.laravel.com/docs/testing#assertions) such as `assertSee()` to assert the modal contains the content that you expect it to:

```php
use function Pest\Livewire\livewire;

it('confirms the target address before sending', function () {
    $invoice = Invoice::factory()->create();
    $recipientEmail = $invoice->company->primaryContact->email;

    livewire(EditInvoice::class, [
        'invoice' => $invoice,
    ])
        ->mountAction('send')
        ->assertSee($recipientEmail);
});
```

## Errors

`assertHasNoActionErrors()` is used to assert that no validation errors occurred when submitting the action form.

To check if a validation error has occurred with the data, use `assertHasActionErrors()`, similar to `assertHasErrors()` in Livewire:

```php
use function Pest\Livewire\livewire;

it('can validate invoice recipient email', function () {
    $invoice = Invoice::factory()->create();

    livewire(EditInvoice::class, [
        'invoice' => $invoice,
    ])
        ->callAction('send', data: [
            'email' => Str::random(),
        ])
        ->assertHasActionErrors(['email' => ['email']]);
});
```

To check if an action is pre-filled with data, you can use the `assertActionDataSet()` method:

```php
use function Pest\Livewire\livewire;

it('can send invoices to the primary contact by default', function () {
    $invoice = Invoice::factory()->create();
    $recipientEmail = $invoice->company->primaryContact->email;

    livewire(EditInvoice::class, [
        'invoice' => $invoice,
    ])
        ->mountAction('send')
        ->assertActionDataSet([
            'email' => $recipientEmail,
        ])
        ->callMountedAction()
        ->assertHasNoActionErrors();

    expect($invoice->refresh())
        ->isSent()->toBeTrue()
        ->recipient_email->toBe($recipientEmail);
});
```

## Action state

To ensure that an action exists or doesn't, you can use the `assertActionExists()` or  `assertActionDoesNotExist()` method:

```php
use function Pest\Livewire\livewire;

it('can send but not unsend invoices', function () {
    $invoice = Invoice::factory()->create();

    livewire(EditInvoice::class, [
        'invoice' => $invoice,
    ])
        ->assertActionExists('send')
        ->assertActionDoesNotExist('unsend');
});
```

To ensure an action is hidden or visible for a user, you can use the `assertActionHidden()` or `assertActionVisible()` methods:

```php
use function Pest\Livewire\livewire;

it('can only print invoices', function () {
    $invoice = Invoice::factory()->create();

    livewire(EditInvoice::class, [
        'invoice' => $invoice,
    ])
        ->assertActionHidden('send')
        ->assertActionVisible('print');
});
```

To ensure an action is enabled or disabled for a user, you can use the `assertActionEnabled()` or `assertActionDisabled()` methods:

```php
use function Pest\Livewire\livewire;

it('can only print a sent invoice', function () {
    $invoice = Invoice::factory()->create();

    livewire(EditInvoice::class, [
        'invoice' => $invoice,
    ])
        ->assertActionDisabled('send')
        ->assertActionEnabled('print');
});
```

To ensure sets of actions exist in the correct order, you can use `assertActionsExistInOrder()`:

```php
use function Pest\Livewire\livewire;

it('can have actions in order', function () {
    $invoice = Invoice::factory()->create();

    livewire(EditInvoice::class, [
        'invoice' => $invoice,
    ])
        ->assertActionsExistInOrder(['send', 'export']);
});
```

To check if an action is hidden to a user, you can use the `assertActionHidden()` method:

```php
use function Pest\Livewire\livewire;

it('can not send invoices', function () {
    $invoice = Invoice::factory()->create();

    livewire(EditInvoice::class, [
        'invoice' => $invoice,
    ])
        ->assertActionHidden('send');
});
```

## Button appearance

To ensure an action has the correct label, you can use `assertActionHasLabel()` and `assertActionDoesNotHaveLabel()`:

```php
use function Pest\Livewire\livewire;

it('send action has correct label', function () {
    $invoice = Invoice::factory()->create();

    livewire(EditInvoice::class, [
        'invoice' => $invoice,
    ])
        ->assertActionHasLabel('send', 'Email Invoice')
        ->assertActionDoesNotHaveLabel('send', 'Send');
});
```

To ensure an action's button is showing the correct icon, you can use `assertActionHasIcon()` or `assertActionDoesNotHaveIcon()`:

```php
use function Pest\Livewire\livewire;

it('when enabled the send button has correct icon', function () {
    $invoice = Invoice::factory()->create();

    livewire(EditInvoice::class, [
        'invoice' => $invoice,
    ])
        ->assertActionEnabled('send')
        ->assertActionHasIcon('send', 'envelope-open')
        ->assertActionDoesNotHaveIcon('send', 'envelope');
});
```

To ensure that an action's button is displaying the right color, you can use `assertActionHasColor()` or `assertActionDoesNotHaveColor()`:

```php
use function Pest\Livewire\livewire;

it('actions display proper colors', function () {
    $invoice = Invoice::factory()->create();

    livewire(EditInvoice::class, [
        'invoice' => $invoice,
    ])
        ->assertActionHasColor('delete', 'danger')
        ->assertActionDoesNotHaveColor('print', 'danger');
});
```

## URL

To ensure an action has the correct URL, you can use `assertActionHasUrl()`, `assertActionDoesNotHaveUrl()`, `assertActionShouldOpenUrlInNewTab()`, and `assertActionShouldNotOpenUrlInNewTab()`:

```php
use function Pest\Livewire\livewire;

it('links to the correct Filament sites', function () {
    $invoice = Invoice::factory()->create();

    livewire(EditInvoice::class, [
        'invoice' => $invoice,
    ])
        ->assertActionHasUrl('filament', 'https://filamentphp.com/')
        ->assertActionDoesNotHaveUrl('filament', 'https://github.com/filamentphp/filament')
        ->assertActionShouldOpenUrlInNewTab('filament')
        ->assertActionShouldNotOpenUrlInNewTab('github');
});
```